DH220LC Slew Drive Assembly 2401-9099C

Pu:3044.890 kN; Static (Cor):45515 kN; Bearing designation:T-49768  ; d:340 mm; Oil:1 429 min-1; Dynamic (Cr):7792 kN; Weight:291 kg; Grease:1 020 min-1; B:140 mm; D:640 mm;

Pu:3044.890 kN; Static (Cor):45515 kN; Bearing designation:T-49768  ; d:340 mm; Oil:1 429 min-1; Dynamic (Cr):7792 kN; Weight:291 kg; Grease:1 020 min-1; B:140 mm; D:640 mm;

Pu:3044.890 kN; Static (Cor):45515 kN; Bearing designation:T-49768  ; d:340 mm; Oil:1 429 min-1; Dynamic (Cr):7792 kN; Weight:291 kg; Grease:1 020 min-1; B:140 mm; D:640 mm;

Basic Radial Load Rating-Static SCO:6700 N; D:47.0000 mm; Basic Interchange FAF:-; Width - Inner Ring B1:17.80 mm; Basic Radial Load Rating-Dynamic DC:13000 N; Speed Rating-Single and Double Sealed Grease SDG:10000 rpm; Basic Interchange NDH:488504; d:20.000 mm; Old MRC Bearing Number:204FFSG; Width - Overall B:17.8 mm;

d3 max.:200.152 mm; d1:147.637 mm; G:169.139 mm; Hydraulic nut:HMVC 34E; Lock washer:W 034; Sleeve:S 3034x5.13/16; Mass adapter sleeve assembly:6.1 kg; Lock nut:N 034; B4:30.175 mm; Threads per inch:8;

B:33 mm; d3:220 mm; d:170 mm; d1:152.4 mm; Hydraulic nut:HMV 34 E; Mass adapter sleeve assembly:7.65 kg; G:M 170x3; Lock nut:KMFE 34; B1:122 mm;

Accessories:Shield & Seal & Snap; Fillet Radius ra:1.50 mm; d:60.000 mm; Basic Static Radial Load Rating Co:58500 N; Grease Speed Rating n1:3800 rpm; Oil Speed Rating n2:5000 rpm; Basic Dynamic Radial Load Rating C:70200 N; Sealed Speed Rating n3:3800 rpm; D:110.0000 mm; B:38.10 mm;

R2:30.163 mm; Stabilizing ring:2 x SR-1617; Da:180 mm; Pa:10.5 kN; PosiTrac Plus contact element:2 x B10724-184; Max. speed for PosiTrac Plus seal:1950 r/min; P60°:104 kN; H:222.25 mm; Appropriate attachment bolt size G:0.75 in; L:387.35 mm;

r1,2 min.:1.5 mm; rb max.:1.5 mm; Limiting speed:7500 r/min; B:25 mm; s max.:1.2 mm; Calculation factor kr:0.15; F:88.5 mm; Reference speed:6000 r/min; ra max.:1.5 mm; da min.:84 mm;

Cap bolt, SAE grade:5; Initial grease fill:82.215 g; Cap bolt recommended tightening torque:81.3 N·m; J min.:187.325 mm; Bearing limiting speed:9000 r/min; Adapter sleeve assembly:SNW 11x1.7/8; L:244.475 mm; da:47.625 mm; ba:25.4 mm; P150°:15.6 kN;

Cap bolt, SAE grade:5; Initial grease fill:82.215 g; Cap bolt recommended tightening torque:81.3 N·m; J min.:187.325 mm; Bearing limiting speed:9000 r/min; Adapter sleeve assembly:SNW 11x1.7/8; L:244.475 mm; da:47.625 mm; ba:25.4 mm; P150°:15.6 kN;

B5:49.479 mm; B1:212.598 mm; d1:277.813 mm; Mass adapter sleeve assembly:27 kg; B:39.954 mm; Hydraulic nut:HMVC 60E; Lock nut:N 060; Sleeve:S 3160x10.15/16; Locking plate:PL 60; d:300 mm;

B:33 mm; d3:220 mm; d:170 mm; d1:152.4 mm; Hydraulic nut:HMV 34 E; Mass adapter sleeve assembly:7.65 kg; G:M 170x3; Lock nut:KMFE 34; B1:122 mm;

r1,2 min.:1.5 mm; rb max.:1.5 mm; Limiting speed:7500 r/min; B:25 mm; s max.:1.2 mm; Calculation factor kr:0.15; F:88.5 mm; Reference speed:6000 r/min; ra max.:1.5 mm; da min.:84 mm;

r1,2 min.:1.5 mm; rb max.:1.5 mm; Limiting speed:7500 r/min; B:25 mm; s max.:1.2 mm; Calculation factor kr:0.15; F:88.5 mm; Reference speed:6000 r/min; ra max.:1.5 mm; da min.:84 mm;