S290LL Slew Drive Assembly 2401-9242

B5:49.479 mm; B1:212.598 mm; d1:277.813 mm; Mass adapter sleeve assembly:27 kg; B:39.954 mm; Hydraulic nut:HMVC 60E; Lock nut:N 060; Sleeve:S 3160x10.15/16; Locking plate:PL 60; d:300 mm;

D1 ≈:391 mm; Axial load factor Y:0.4; Mass bearing:118 kg; Basic static load rating C0:3450 kN; ra max.:4 mm; da min.:238 mm; Basic dynamic load rating C:2380 kN; db min.:272 mm; s max.:10.4 mm; Limiting value e:0.3;

Pu:3044.890 kN; Static (Cor):45515 kN; Bearing designation:T-49768  ; d:340 mm; Oil:1 429 min-1; Dynamic (Cr):7792 kN; Weight:291 kg; Grease:1 020 min-1; B:140 mm; D:640 mm;

Reference speed:2600 r/min; ra max.:4 mm; Calculation factor Y:1.7; Calculation factor Y0:0.9; Basic dynamic load rating C:353 kN; da max.:114 mm; db min.:105.5 mm; Da max.:177.5 mm; Db min.:176 mm; r1,2 min.:4 mm;

d2:70 mm; r1s (min):2.5 mm; Static (Coa):251 kN; D:150 mm; Dynamic (Ca):211 kN; B:35 mm; T:38 mm; C:30 mm; Pu:29.550 kN; r2s (min):1 mm;

B:33 mm; d3:220 mm; d:170 mm; d1:152.4 mm; Hydraulic nut:HMV 34 E; Mass adapter sleeve assembly:7.65 kg; G:M 170x3; Lock nut:KMFE 34; B1:122 mm;

Cap bolt, SAE grade:5; Initial grease fill:82.215 g; Cap bolt recommended tightening torque:81.3 N·m; J min.:187.325 mm; Bearing limiting speed:9000 r/min; Adapter sleeve assembly:SNW 11x1.7/8; L:244.475 mm; da:47.625 mm; ba:25.4 mm; P150°:15.6 kN;

B5:49.479 mm; B1:212.598 mm; d1:277.813 mm; Mass adapter sleeve assembly:27 kg; B:39.954 mm; Hydraulic nut:HMVC 60E; Lock nut:N 060; Sleeve:S 3160x10.15/16; Locking plate:PL 60; d:300 mm;

A2:149.225 mm; Mass pillow block:21.5 kg; H:192.088 mm; Appropriate attachment bolt size G:0.625 in; P180°:42.3 kN; J min.:263.525 mm; RG:3/8 NPT; Cap bolt, SAE grade:8; N1:19.05 mm; Housing:FSAF 615;

r1,2 min.:1.5 mm; rb max.:1.5 mm; Limiting speed:7500 r/min; B:25 mm; s max.:1.2 mm; Calculation factor kr:0.15; F:88.5 mm; Reference speed:6000 r/min; ra max.:1.5 mm; da min.:84 mm;

B:33 mm; d3:220 mm; d:170 mm; d1:152.4 mm; Hydraulic nut:HMV 34 E; Mass adapter sleeve assembly:7.65 kg; G:M 170x3; Lock nut:KMFE 34; B1:122 mm;

A2:149.225 mm; P90°:60.9 kN; Housing:FSAF 518; R1:60.325 mm; End plug (suffix Y):EPR 11; P60°:101 kN; Bearing:1218 K; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; N1:19.05 mm;

A2:149.225 mm; P90°:60.9 kN; Housing:FSAF 518; R1:60.325 mm; End plug (suffix Y):EPR 11; P60°:101 kN; Bearing:1218 K; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; N1:19.05 mm;

d3 max.:200.152 mm; d1:147.637 mm; G:169.139 mm; Hydraulic nut:HMVC 34E; Lock washer:W 034; Sleeve:S 3034x5.13/16; Mass adapter sleeve assembly:6.1 kg; Lock nut:N 034; B4:30.175 mm; Threads per inch:8;

B5:49.479 mm; B1:212.598 mm; d1:277.813 mm; Mass adapter sleeve assembly:27 kg; B:39.954 mm; Hydraulic nut:HMVC 60E; Lock nut:N 060; Sleeve:S 3160x10.15/16; Locking plate:PL 60; d:300 mm;