Bearing 420KV80

E:50 mm; Limiting speed:10000 r/min; Db:45.6 mm; r1,2 min.:0.3 mm; da:49.2 mm; Da:50.5 mm; Fatigue load limit Pu:5.6 kN; Mass bearing:0.083 kg; Basic dynamic load rating C:21.6 kN; Fw:45 mm;

l7 min.:48 mm; G:M 45x3; Basic dynamic load rating C:127 kN; α:7 °; w:55 mm; Mass rod end:3.2 kg; C1 max.:28 mm; dk:60 mm; B:32 mm; Basic static load rating C0:224 kN;

da:42.862 mm; Basic dynamic load rating C:102 kN; H:107.95 mm; S:0.794 mm; Limiting speed:4500 r/min; J max.:161.925 mm; L:200.025 mm; B:59.531 mm; J min.:155.575 mm; s:29.766 mm;

D:200.0000 mm; Basic Dynamic Radial Load Rating C:291000 N; d:95.000 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:325000 N; Fillet Radius ra:2.50 mm; B:90.00 mm; Oil Speed Rating n2:3200 rpm; Grease Speed Rating n1:2500 rpm;

da:42.862 mm; Basic dynamic load rating C:102 kN; H:107.95 mm; S:0.794 mm; Limiting speed:4500 r/min; J max.:161.925 mm; L:200.025 mm; B:59.531 mm; J min.:155.575 mm; s:29.766 mm;

Dynamic (Ca):117 kN; Pu:13.900 kN; d2 (max):71.4 mm; b1:13 mm; F:65 mm; b:8 mm; Static (Coa):114 kN; d2:50 mm; D:110 mm; rs (min):2 mm;

Dynamic load rating C1:7991 kN; Reference speed:300 r/min; r3,4 min.:16 mm; Industry reference:T921; D:546.1 mm; Mass bearing:159 kg; Dynamic load rating C90:2072 kN; Limiting speed:560 r/min; Basic dynamic load rating C:5850 kN; Basic static load rating C0:23200 kN;

r3,4 min.:0.6 mm; Static moment stiffness:290 N·m/mrad; rb max.:0.6 mm; b:4.2 mm; Mass bearing:0.41 kg; ra max.:0.3 mm; H:28 mm; d:30 mm; Preload:2250 N; K:3 mm;

r3,4 min.:0.6 mm; Static moment stiffness:290 N·m/mrad; rb max.:0.6 mm; b:4.2 mm; Mass bearing:0.41 kg; ra max.:0.3 mm; H:28 mm; d:30 mm; Preload:2250 N; K:3 mm;

Da:250 mm; H2:60.325 mm; P60°:301 kN; P120°:116 kN; H:298.45 mm; Taconite seal:TER 121; R2:38.1 mm; Cap bolt, SAE grade:8; Initial grease fill:481.95 g; L:511.175 mm;

Mass bearing unit:22.5 kg; J min.:304.8 mm; H2:61.913 mm; H1:107.95 mm; J max.:333.375 mm; J1:57.15 mm; Attachment bolt diameter G:19.05 mm; s:41.275 mm; da:101.6 mm; d2:152.4 mm;

Cap bolt recommended tightening torque:203.4 N·m; R2:33.337 mm; Cap bolt:4 x 3/4-10 UNC; PG:1/4 NPT; P90°:136 kN; ba:72.231 mm; J1:95.25 mm; Cap bolt, SAE grade:5; P60°:226 kN; Bearing:22326 CC/W33;

D:200.0000 mm; Basic Dynamic Radial Load Rating C:291000 N; d:95.000 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:325000 N; Fillet Radius ra:2.50 mm; B:90.00 mm; Oil Speed Rating n2:3200 rpm; Grease Speed Rating n1:2500 rpm;

d:40.000 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:47500 N; Basic Static Radial Load Rating Co:30500 N; B:23.00 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:9000 rpm; Grease Speed Rating n1:6700 rpm;

Da:250 mm; H2:60.325 mm; P60°:301 kN; P120°:116 kN; H:298.45 mm; Taconite seal:TER 121; R2:38.1 mm; Cap bolt, SAE grade:8; Initial grease fill:481.95 g; L:511.175 mm;