Bearing 232/500CAKE4

Stabilizing ring:SR-26-0; PosiTrac Plus contact element (dc shaft position):B10724-122; Labyrinth ring (dc shaft position):LOR 122; Pa:54.7 kN; P150°:68.1 kN; Eye bolt:3/8-16 UNC; RG:1/2 NPT; R2:36.513 mm; Cap bolt recommended tightening torque:400 N·m; db:149.225 mm;

r3,4 min.:2.5 mm; B:29 mm; Dimension series:M 716600; r1,2 min.:3 mm; Basic dynamic load rating C:172 kN; db min.:98 mm; Da max.:119 mm; Mass bearing:1.39 kg; Db min.:125 mm; Da min.:115 mm;

Basic Dynamic Radial Load Rating C:53900 N; Accessories:One Shield; d:35.000 mm; Fillet Radius ra:1.50 mm; B:25.00 mm; Basic Static Radial Load Rating Co:39000 N; Oil Speed Rating Open/Shielded n2:6800 rpm; D:100.0000 mm; Grease Speed Rating Open/Shielded n1:5600 rpm;

K:14 mm; Calculation factor e:0.43; C:121 mm; Calculation factor Y2:2.3; T:145 mm; l:47 mm; Basic static load rating C0:850 kN; db min.:97 mm; r5 min.:0.6 mm; D:150 mm;

d:130.000 mm; B:33.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:100000 N; Oil Speed Rating Open/Shielded n2:3800 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Accessories:Shield & Seal; Basic Dynamic Radial Load Rating C:106000 N; D:200.0000 mm; Sealed Speed Rating n3:2000 rpm;

Calculation factor e:0.16; B5:66 mm; db min.:433 mm; d3:490 mm; Reference speed:1000 r/min; Basic static load rating C0:4150 kN; D:560 mm; Calculation factor Y1:4.2; K:9 mm; B2:52 mm;

Mass bushing:24.2 kg; B:350 mm; Specific dynamic load factor K:25 N/mm²; Tolerance housing:H7; α:124 °; D:260 mm; Coefficient of friction µ max.:0.15; h:242.5 mm; Tolerance shaft:e7; a:17.5 mm;

Calculation factor X:0.39; D:1030 mm; d:710 mm; r3,4 min.:4 mm; a:321 mm; Da max.:1002 mm; d1 ≈:836 mm; Calculation factor e:0.8; Limiting speed:600 r/min; Basic dynamic load rating C:1190 kN;

d:101.6 mm; M:8 mm; ra max.:1.5 mm; rb max.:1 mm; Basic static load rating C0:2650 kN; D:158.75 mm; Material constant KM:330; B:152.4 mm; Da min.:139.5 mm; r1 min.:1.5 mm;

Basic static load rating C0:26000 kN; Reference speed:140 r/min; d:630 mm; Basic dynamic load rating C:4800 kN; r1,2 min.:6 mm; Limiting speed:280 r/min; D:850 mm; da min.:808 mm; D1:638 mm; Da max.:672 mm;

Specific dynamic load factor K:10 N/mm²; d:60 mm; B:60 mm; D1:85 mm; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Tolerance housing:H7; Tolerance shaft:h8; D:75 mm; Coefficient of friction µ min.:0.05;

Mass bushing:24.2 kg; B:350 mm; Specific dynamic load factor K:25 N/mm²; Tolerance housing:H7; α:124 °; D:260 mm; Coefficient of friction µ max.:0.15; h:242.5 mm; Tolerance shaft:e7; a:17.5 mm;

Hydraulic nut:HMVC 56E; d:280 mm; d1:266.7 mm; Lock nut:N 056; G:279.502 mm; Locking plate:PL 56; Threads per inch:6; B:38.354 mm; B5:47.092 mm; Sleeve:S 3156x10.1/2;

d:30.000 mm; Speed Rating-Single and Double Sealed Grease SDG:7500 rpm; Width - Inner Ring B1:24.00 mm; Width - Overall B:24.0 mm; Basic Interchange NDH:488506; Old MRC Bearing Number:206FFSG; Basic Interchange FAF:-; Basic Interchange BCA:-; Width - Outer Ring B0:16.0 mm; Fillet Radius ra:1.00 mm;

Calculation factor X:0.39; D:1030 mm; d:710 mm; r3,4 min.:4 mm; a:321 mm; Da max.:1002 mm; d1 ≈:836 mm; Calculation factor e:0.8; Limiting speed:600 r/min; Basic dynamic load rating C:1190 kN;