Bearing NUP260 NTN

T:17.25 mm; r2s (min):0.3 mm; Dynamic (Ca):39.3 kN; d2:30 mm; r1s (min):1 mm; C:14 mm; rs (min):1 mm; Static (Coa):42.8 kN; B:16 mm; Pu:5.220 kN;

Ca min.:3.8 mm; B5:90 mm; Da max.:674 mm; B1:304 mm; Ba min.:16 mm; d2 ≈:507 mm; Mass bearing + sleeve:395 kg; Fatigue load limit Pu:720 kN; Basic dynamic load rating C:6000 kN; Misalignment factor k1:0.113;

R1:122.237 mm; ba:89.694 mm; P180°:222 kN; J1:127 mm; J min.:571.5 mm; Labyrinth ring:2 x LOR 552; Housing:SAFS 048 KA; N1:34.925 mm; R2:42.862 mm; RG:1 NPT;

Specific dynamic load factor K:100 N/mm²; l3 min.:46 mm; N max.:82 mm; Size bolt with internal hexagon:M 10; G:M 33x2; l4 max.:146.5 mm; Basic static load rating C0:176 kN; α:4 °; Tightening torque bolt with internal hexagon:46 N·m; Material constant KM:330;

Basic Static Radial Load Rating Co:81500 N; Oil Speed Rating n2:5000 rpm; Sealed Speed Rating n3:3800 rpm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:106000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3800 rpm; B:52.40 mm; Accessories:Two Seals & Snap-Rin; d:55.000 mm;

Specific dynamic load factor K:100 N/mm²; l3 min.:46 mm; N max.:82 mm; Size bolt with internal hexagon:M 10; G:M 33x2; l4 max.:146.5 mm; Basic static load rating C0:176 kN; α:4 °; Tightening torque bolt with internal hexagon:46 N·m; Material constant KM:330;

G:M 170x3; Lock nut:KML 34; B4:28.5 mm; Hydraulic nut:HMV 34 E; d3:200 mm; B:26 mm; B1:101 mm; d:170 mm; Locking device:MBL 34; d1:150.813 mm;

Basic Static Radial Load Rating Co:81500 N; Oil Speed Rating n2:5000 rpm; Sealed Speed Rating n3:3800 rpm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:106000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3800 rpm; B:52.40 mm; Accessories:Two Seals & Snap-Rin; d:55.000 mm;

G:M 170x3; Lock nut:KML 34; B4:28.5 mm; Hydraulic nut:HMV 34 E; d3:200 mm; B:26 mm; B1:101 mm; d:170 mm; Locking device:MBL 34; d1:150.813 mm;

T:17.25 mm; r2s (min):0.3 mm; Dynamic (Ca):39.3 kN; d2:30 mm; r1s (min):1 mm; C:14 mm; rs (min):1 mm; Static (Coa):42.8 kN; B:16 mm; Pu:5.220 kN;

ba:61.119 mm; P60°:301 kN; Mass pillow block:92.5 kg; J1:85.725 mm; Housing:SAFS 528; Eye bolt:2 x 3/8-16 UNC; Adapter sleeve assembly:SNW 28x5; P90°:180 kN; H2:60.325 mm; Max. speed for PosiTrac Plus seal:1150 r/min;