Bearing NUP264 KOYO

da min.:897 mm; Calculation factor kr:0.36; Reference speed:300 r/min; Da max.:1334 mm; D1 ≈:1213 mm; d:850 mm; ra max.:5 mm; b:22.3 mm; B:500 mm; Fatigue load limit Pu:2900 kN;

N1:22.225 mm; Stabilizing ring:2 x SR-1520; h:42.069 mm; P180°:48.9 kN; P60°:119 kN; Mass pillow block:26.8 kg; End plug (suffix Y):EPR 15; Lock washer:W 20; Ca:55.804 mm; Bearing:1220;

G:M 170x3; Lock nut:KML 34; B4:28.5 mm; Hydraulic nut:HMV 34 E; d3:200 mm; B:26 mm; B1:101 mm; d:170 mm; Locking device:MBL 34; d1:150.813 mm;

Ca min.:3.8 mm; B5:90 mm; Da max.:674 mm; B1:304 mm; Ba min.:16 mm; d2 ≈:507 mm; Mass bearing + sleeve:395 kg; Fatigue load limit Pu:720 kN; Basic dynamic load rating C:6000 kN; Misalignment factor k1:0.113;

ba:61.119 mm; P60°:301 kN; Mass pillow block:92.5 kg; J1:85.725 mm; Housing:SAFS 528; Eye bolt:2 x 3/8-16 UNC; Adapter sleeve assembly:SNW 28x5; P90°:180 kN; H2:60.325 mm; Max. speed for PosiTrac Plus seal:1150 r/min;

d1 ≈:296.8 mm; Basic dynamic load rating C:698 kN; D:342.9 mm; a:59.47 mm; rb max.:3.3 mm; Calculation factor e:0.35; B:57.15 mm; r1,2 min.:6.4 mm; Limiting speed:1600 r/min; da max.:273 mm;

Basic Static Radial Load Rating Co:81500 N; Oil Speed Rating n2:5000 rpm; Sealed Speed Rating n3:3800 rpm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:106000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3800 rpm; B:52.40 mm; Accessories:Two Seals & Snap-Rin; d:55.000 mm;

D:440 mm; B:120 mm; with tapered bore:890 min-1; Pu:1660 kN; with cylindrical bore:750 min-1; Static (Cor):22.3 mm; d:240 mm; rs (min):4 mm; Dynamic (Cr):12 mm; Grease:2560 kN;

G:M 170x3; Lock nut:KML 34; B4:28.5 mm; Hydraulic nut:HMV 34 E; d3:200 mm; B:26 mm; B1:101 mm; d:170 mm; Locking device:MBL 34; d1:150.813 mm;

D:440 mm; B:120 mm; with tapered bore:890 min-1; Pu:1660 kN; with cylindrical bore:750 min-1; Static (Cor):22.3 mm; d:240 mm; rs (min):4 mm; Dynamic (Cr):12 mm; Grease:2560 kN;

ba:61.119 mm; P60°:301 kN; Mass pillow block:92.5 kg; J1:85.725 mm; Housing:SAFS 528; Eye bolt:2 x 3/8-16 UNC; Adapter sleeve assembly:SNW 28x5; P90°:180 kN; H2:60.325 mm; Max. speed for PosiTrac Plus seal:1150 r/min;

Ca min.:3.8 mm; B5:90 mm; Da max.:674 mm; B1:304 mm; Ba min.:16 mm; d2 ≈:507 mm; Mass bearing + sleeve:395 kg; Fatigue load limit Pu:720 kN; Basic dynamic load rating C:6000 kN; Misalignment factor k1:0.113;

Fillet Radius rb:1.50 mm; Grease Speed Rating n1:960 rpm; Fillet Radius ra:4.00 mm; B:170.00 mm; D:540.0000 mm; Oil Speed Rating n2:1300 rpm; Basic Dynamic Radial Load Rating C:1010000 N; d:300.000 mm; Basic Static Radial Load Rating Co:2200000 N;