Bearings Cylindrical Roller Bearings NN30/600

Sleeve:S 3040x7.3/16; Threads per inch:8; Lock washer:W 040; d1:182.563 mm; B4:33.35 mm; Hydraulic nut:HMVC 40E; Mass adapter sleeve assembly:8.85 kg; G:199.314 mm; d3 max.:239.852 mm; B1:120.396 mm;

P120°:7.56 kN; Cap bolt recommended tightening torque:61 N·m; da:38.1 mm; P90°:12.5 kN; Cap bolt, SAE grade:5; Stabilizing ring:SR-9-0; Initial grease fill:51.03 g; A1:60.325 mm; Pa:2.54 kN; Labyrinth ring:2 x LER 18;

d:300 mm; r1,2 min.:3 mm; Mass shaft washer:15.2 kg; d1:415 mm; B:28.5 mm;

Fillet Radius ra:1.50 mm; B:50.00 mm; Basic Static Radial Load Rating Co:120000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:117000 N; Oil Speed Rating n2:4300 rpm; D:130.0000 mm; d:75.000 mm;

B:62.00 mm; d:50.000 mm; Basic Static Radial Load Rating Co:129000 N; Basic Dynamic Radial Load Rating C:156000 N; D:130.0000 mm; Oil Speed Rating n2:6000 rpm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:3400 rpm; Fillet Radius ra:2.00 mm;

B5:117.45 mm; Hexagonal head bolt:3/4-10x1-1/2; b:62.992 mm; Threads per inch:3; Mass lock nut:175 kg; d1:1028.7 mm; d2:1031.494 mm; h:25.654 mm; Locking device:PL 950; B:100.406 mm;

Mass withdrawal sleeve:143 kg; Nut for removal:HM 31/600; G:Tr 600x6; d:560 mm; d1:530 mm; Hydraulic nut:HMV 120 E; A:11 mm; B1:422 mm; G1:57 mm; G2:G 1/4;

C:49 mm; a:51.665 mm; Mass bearing:7.6 kg; r3,4 min.:3 mm; r1,2 min.:4 mm; B:60 mm; ra max.:4 mm; Db min.:169 mm; Basic dynamic load rating C:417 kN; Basic static load rating C0:560 kN;

d:300 mm; r1,2 min.:3 mm; Mass shaft washer:15.2 kg; d1:415 mm; B:28.5 mm;

Grease Speed Rating n1:4800 rpm; B:56.00 mm; D:220.0000 mm; Basic Static Radial Load Rating Co:315000 N; Basic Dynamic Radial Load Rating C:208000 N; Fillet Radius ra:2.00 mm; d:160.000 mm; Oil Speed Rating n2:7200 rpm; Fillet Radius rb:1.00 mm;

Mass withdrawal sleeve:143 kg; Nut for removal:HM 31/600; G:Tr 600x6; d:560 mm; d1:530 mm; Hydraulic nut:HMV 120 E; A:11 mm; B1:422 mm; G1:57 mm; G2:G 1/4;

H:134.938 mm; H2:25.4 mm; P90°:20.9 kN; Cap bolt:2 x 1/2-13 UNC; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; S:4.763 mm; ba:30.956 mm; da:34.925 mm; Initial grease fill:39.69 g;

Grease Speed Rating n1:4800 rpm; B:56.00 mm; D:220.0000 mm; Basic Static Radial Load Rating Co:315000 N; Basic Dynamic Radial Load Rating C:208000 N; Fillet Radius ra:2.00 mm; d:160.000 mm; Oil Speed Rating n2:7200 rpm; Fillet Radius rb:1.00 mm;

d:300 mm; r1,2 min.:3 mm; Mass shaft washer:15.2 kg; d1:415 mm; B:28.5 mm;

D:130 mm; Mass bearing:1.36 kg; B:29 mm; db min.:95 mm; d1 ≈:108.1 mm; Calculation factor Y0:0.8; r1,2 min.:1.5 mm; a:27.957 mm; Da min.:117 mm; Limiting speed:4800 r/min;