Bearings Cylindrical Roller Bearings NNU3028

P120°:7.56 kN; Cap bolt recommended tightening torque:61 N·m; da:38.1 mm; P90°:12.5 kN; Cap bolt, SAE grade:5; Stabilizing ring:SR-9-0; Initial grease fill:51.03 g; A1:60.325 mm; Pa:2.54 kN; Labyrinth ring:2 x LER 18;

Reference speed:16000 r/min; Fw:24 mm; Mass needle roller and cage assembly:0.032 kg; Fatigue load limit Pu:5.3 kN; Basic static load rating C0:43 kN; U:31 mm; Limiting speed:18000 r/min; Ew:30 mm; Basic dynamic load rating C:26.4 kN;

P120°:7.56 kN; Cap bolt recommended tightening torque:61 N·m; da:38.1 mm; P90°:12.5 kN; Cap bolt, SAE grade:5; Stabilizing ring:SR-9-0; Initial grease fill:51.03 g; A1:60.325 mm; Pa:2.54 kN; Labyrinth ring:2 x LER 18;

d:300 mm; r1,2 min.:3 mm; Mass shaft washer:15.2 kg; d1:415 mm; B:28.5 mm;

P120°:7.56 kN; Cap bolt recommended tightening torque:61 N·m; da:38.1 mm; P90°:12.5 kN; Cap bolt, SAE grade:5; Stabilizing ring:SR-9-0; Initial grease fill:51.03 g; A1:60.325 mm; Pa:2.54 kN; Labyrinth ring:2 x LER 18;

Fillet Radius ra:1.50 mm; B:50.00 mm; Basic Static Radial Load Rating Co:120000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:117000 N; Oil Speed Rating n2:4300 rpm; D:130.0000 mm; d:75.000 mm;

D:85 mm; D1:47 mm; r1,2 min.:1 mm; B:8.25 mm; Mass housing washer:0.26 kg;

d:300 mm; r1,2 min.:3 mm; Mass shaft washer:15.2 kg; d1:415 mm; B:28.5 mm;

C:49 mm; a:51.665 mm; Mass bearing:7.6 kg; r3,4 min.:3 mm; r1,2 min.:4 mm; B:60 mm; ra max.:4 mm; Db min.:169 mm; Basic dynamic load rating C:417 kN; Basic static load rating C0:560 kN;

D:85 mm; D1:47 mm; r1,2 min.:1 mm; B:8.25 mm; Mass housing washer:0.26 kg;

Fillet Radius ra:1.50 mm; B:50.00 mm; Basic Static Radial Load Rating Co:120000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:117000 N; Oil Speed Rating n2:4300 rpm; D:130.0000 mm; d:75.000 mm;

Grease Speed Rating n1:4800 rpm; B:56.00 mm; D:220.0000 mm; Basic Static Radial Load Rating Co:315000 N; Basic Dynamic Radial Load Rating C:208000 N; Fillet Radius ra:2.00 mm; d:160.000 mm; Oil Speed Rating n2:7200 rpm; Fillet Radius rb:1.00 mm;

d:300 mm; r1,2 min.:3 mm; Mass shaft washer:15.2 kg; d1:415 mm; B:28.5 mm;

Calculation factor f:1.19; D1:90.8 mm; Calculation factor (single, tandem) Y0:0.38; b:2 mm; C2:3.5 mm; Static axial stiffness, preload class B:261 N/µm; Static axial stiffness, preload class A:200 N/µm; Preload class C GC:800 N; Calculation factor (single, tandem) Y2:0.87; Static axial stiffness, preload class C:348 N/µm;

B5:117.45 mm; Hexagonal head bolt:3/4-10x1-1/2; b:62.992 mm; Threads per inch:3; Mass lock nut:175 kg; d1:1028.7 mm; d2:1031.494 mm; h:25.654 mm; Locking device:PL 950; B:100.406 mm;