KOMATSU TRANSMISSION 42N-15-12211

T:104 mm; B:98 mm; Calculation factor Y:1.5; r1,2 min.:4 mm; d1 ≈:274.5 mm; Db min.:340 mm; Reference speed:1300 r/min; rb max.:4 mm; Da min.:302 mm; Mass bearing:42.4 kg;

J1:53.975 mm; H2:47.625 mm; s:31.75 mm; Mass bearing unit:11.6 kg; d2:111.125 mm; H:160.338 mm; H1:79.375 mm; A:101.6 mm; Limiting speed:950 r/min; B:92.075 mm;

Dynamic (Cr):9 mm; rs (min):4 mm; B:92 mm; Oil:172.970 kN; D:340 mm; Static (Cor):16.7 mm; Grease:1900 kN; with cylindrical bore:1 200 min-1; Pu:1270 kN; d:190 mm;

rs (min):2.1 mm; Grease:330 kN; B:51 mm; with cylindrical bore:2 400 min-1; D:150 mm; Pu:289 kN; with tapered bore:3 000 min-1; Oil:38.850 kN; Dynamic (Cr):3 mm; d:70 mm;

J1:95.25 mm; R1:95.25 mm; P150°:80.1 kN; Adapter sleeve assembly:SNW 130x5.5/16; Cap bolt recommended tightening torque:359.3 N·m; End plug (suffix Y):EPR 16; Labyrinth ring:2 x LOR 127; h:50.8 mm; J max.:463.55 mm; Stabilizing ring:SR-30-0;

Limiting speed:3600 r/min; Reference speed:2200 r/min; D1 ≈:278.6 mm; da max.:230 mm; Calculation factor kr:0.15; Limiting value e:0.2; Axial load factor Y:0.6; Da max.:302.2 mm; C:52 mm; Fatigue load limit Pu:88 kN;

J1:95.25 mm; R1:95.25 mm; P150°:80.1 kN; Adapter sleeve assembly:SNW 130x5.5/16; Cap bolt recommended tightening torque:359.3 N·m; End plug (suffix Y):EPR 16; Labyrinth ring:2 x LOR 127; h:50.8 mm; J max.:463.55 mm; Stabilizing ring:SR-30-0;

J1:95.25 mm; R1:95.25 mm; P150°:80.1 kN; Adapter sleeve assembly:SNW 130x5.5/16; Cap bolt recommended tightening torque:359.3 N·m; End plug (suffix Y):EPR 16; Labyrinth ring:2 x LOR 127; h:50.8 mm; J max.:463.55 mm; Stabilizing ring:SR-30-0;

P150°:68.1 kN; Cap bolt:2 x 1-8 UNC; Housing:SAF 622; Appropriate attachment bolt size G:0.875 in; J min.:371.475 mm; A2:206.375 mm; R1:79.375 mm; Ca:89.789 mm; End plug (suffix Y):EPR 13; Da:240 mm;

Dimension N:0.3438 in; Basic Dynamic Radial Load Rating:3150 lbf; Shaft Diameter D:1 in; Dimension F:0.5000 in; Basic Static Radial Load Rating Co:1750 lbf; Distance H:1.125 in; Pin Dia BS:3/8; Diameter G:0.4063 in; Dimension B:4.7500 in; Distance J:1.6250 in;

rs (min):2.1 mm; Grease:330 kN; B:51 mm; with cylindrical bore:2 400 min-1; D:150 mm; Pu:289 kN; with tapered bore:3 000 min-1; Oil:38.850 kN; Dynamic (Cr):3 mm; d:70 mm;

P150°:68.1 kN; Cap bolt:2 x 1-8 UNC; Housing:SAF 622; Appropriate attachment bolt size G:0.875 in; J min.:371.475 mm; A2:206.375 mm; R1:79.375 mm; Ca:89.789 mm; End plug (suffix Y):EPR 13; Da:240 mm;

B:32.00 mm; Basic Dynamic Radial Load Rating C:117000 N; Grease Speed Rating n1:3500 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4500 rpm; d:95.000 mm; D:170.0000 mm; Basic Static Radial Load Rating Co:108000 N;

L:711.2 mm; Bearing:22238 CCK/W33; P60°:416 kN; H:398.462 mm; Eye bolt:2 x 1/2-13 UNC; da:173.037 mm; Taconite seal:TER 153; Initial grease fill:1672.65 g; Cap bolt:1 1/8-7 UNC; Mass pillow block:223 kg;

J1:95.25 mm; R1:95.25 mm; P150°:80.1 kN; Adapter sleeve assembly:SNW 130x5.5/16; Cap bolt recommended tightening torque:359.3 N·m; End plug (suffix Y):EPR 16; Labyrinth ring:2 x LOR 127; h:50.8 mm; J max.:463.55 mm; Stabilizing ring:SR-30-0;