PC300-6 bucket cylinder assembly,PC300-6 PC330 excavator hydraulic arm/boom cylinder,207-63-02531,207-63-02501, 207-63-02522

N1:15.875 mm; L:209.55 mm; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; P60°:32.5 kN; R2:15.875 mm; PG:1/8 NPT; J max.:177.8 mm; RG:1/8 NPT; db:49.2 mm;

Basic Dynamic Radial Load Rating C:101000 N; Oil Speed Rating n2:4300 rpm; B:39.70 mm; d:70.000 mm; Basic Static Radial Load Rating Co:125000 N; Grease Speed Rating n1:3200 rpm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Seals & Snap-Rin; Fillet Radius ra:1.50 mm; D:125.0000 mm;

D:52 mm; E:46.5 mm; Static (Coa):25.6 kN; Pu:3.120 kN; rs (min):1 mm; d2 (max):34.9 mm; d2:25 mm; F:32 mm; b:3 mm; B:15 mm;

Lock nut:KMFE 24; G:M 120x2; d1:106.362 mm; B1:112 mm; d:120 mm; d3:155 mm; Mass adapter sleeve assembly:3.7 kg; B:26 mm; Hydraulic nut:HMV 24 E;

Lock nut:KMFE 24; G:M 120x2; d1:106.362 mm; B1:112 mm; d:120 mm; d3:155 mm; Mass adapter sleeve assembly:3.7 kg; B:26 mm; Hydraulic nut:HMV 24 E;

dk:60 mm; d2 max.:104 mm; G:M 42x3; α:7 °; Mass rod end:2.45 kg; l2 max.:217 mm; C1 max.:28 mm; Specific dynamic load factor K:150 N/mm²; B:32 mm; Basic dynamic load rating C:190 kN;

dk:60 mm; d2 max.:104 mm; G:M 42x3; α:7 °; Mass rod end:2.45 kg; l2 max.:217 mm; C1 max.:28 mm; Specific dynamic load factor K:150 N/mm²; B:32 mm; Basic dynamic load rating C:190 kN;

Lock nut:KMFE 24; G:M 120x2; d1:106.362 mm; B1:112 mm; d:120 mm; d3:155 mm; Mass adapter sleeve assembly:3.7 kg; B:26 mm; Hydraulic nut:HMV 24 E;

Lock nut:KMFE 24; G:M 120x2; d1:106.362 mm; B1:112 mm; d:120 mm; d3:155 mm; Mass adapter sleeve assembly:3.7 kg; B:26 mm; Hydraulic nut:HMV 24 E;

d:100.000 mm; Grease Speed Rating n1:1800 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:2600 rpm; Sealed Speed Rating n3:1800 rpm; B:82.60 mm; D:215.0000 mm; Basic Dynamic Radial Load Rating C:255000 N; Accessories:One Seal; Basic Static Radial Load Rating Co:255000 N;

rc max.:1 mm; Basic dynamic load rating C:1057 kN; Calculation factor e:0.35; Da max.:202 mm; r3,4 min.:3 mm; 2B:146 mm; K:12 mm; Ca min.:8 mm; d:100 mm; b:18 mm;

ra max.:2 mm; K:4 mm; das:145 mm; Fatigue load limit Pu:143 kN; Basic static load rating C0:1250 kN; s max.:5 mm; B:95 mm; D:200 mm; Mass bearing:10.2 kg; da min.:141 mm;

D:150.0000 mm; Oil Speed Rating n2:3800 rpm; B:63.50 mm; d:70.000 mm; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2800 rpm; Accessories:Shield & Seal & Snap; Grease Speed Rating n1:2800 rpm; Basic Static Radial Load Rating Co:125000 N;

dk:60 mm; d2 max.:104 mm; G:M 42x3; α:7 °; Mass rod end:2.45 kg; l2 max.:217 mm; C1 max.:28 mm; Specific dynamic load factor K:150 N/mm²; B:32 mm; Basic dynamic load rating C:190 kN;