Bearing 320TDI450-1

Fillet Radius ra:1.00 mm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:22900 N; B:20.60 mm; Grease Speed Rating n1:8000 rpm; d:25.000 mm; Oil Speed Rating n2:11000 rpm; Basic Static Radial Load Rating Co:21200 N; D:52.0000 mm; Sealed Speed Rating n3:8000 rpm;

ba:63.5 mm; Stabilizing ring:SR-0-22; Appropriate attachment bolt size G:0.875 in; H1:152.4 mm; H2:60.325 mm; H:287.337 mm; Cap bolt recommended tightening torque:1220 N·m; Da:240 mm; Adapter sleeve assembly:SNW 122x3.11/16; Cap bolt, SAE grade:8;

B:14.00 mm; d:20.000 mm; D:47.0000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:15000 rpm; Basic Static Radial Load Rating Co:8500 N; Oil Speed Rating n2:18000 rpm; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:14000 N;

Fillet Radius ra:1.00 mm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:22900 N; B:20.60 mm; Grease Speed Rating n1:8000 rpm; d:25.000 mm; Oil Speed Rating n2:11000 rpm; Basic Static Radial Load Rating Co:21200 N; D:52.0000 mm; Sealed Speed Rating n3:8000 rpm;

Static (Cor):5.5 mm; with tapered bore:3 800 min-1; Oil:34.020 kN; d:55 mm; B:43 mm; Grease:279 kN; D:120 mm; with cylindrical bore:3 000 min-1; rs (min):2 mm; Pu:230 kN;

A1:88.9 mm; Labyrinth ring (dc shaft position):LOR 37; P120°:21.8 kN; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:298.3 N·m; H2:31.75 mm; Cap bolt:2 x 5/8-11 UNC; db:77.787 mm; J1:53.975 mm; H:167.481 mm;

r1s (min):1.1 mm; D:80 mm; d2:40 mm; F:50 mm; B:23 mm; E:mm; d2 (max):mm; b1:mm; Pu:6.850 kN; Dynamic (Ca):57.3 kN;

Fatigue load limit Pu:0.475 kN; B:38.1 mm; Limiting speed:1200 r/min; A1:15 mm; Recommended tightening torque for grub screw:4 N·m; Mass bearing unit:0.44 kg; Hexagonal key size for grub screw N:3 mm; Db:78 mm; Da:76.2 mm; A5:20 mm;

Fillet Radius ra:1.00 mm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:22900 N; B:20.60 mm; Grease Speed Rating n1:8000 rpm; d:25.000 mm; Oil Speed Rating n2:11000 rpm; Basic Static Radial Load Rating Co:21200 N; D:52.0000 mm; Sealed Speed Rating n3:8000 rpm;

P180°:127 kN; Initial grease fill:481.95 g; R2:38.1 mm; P90°:180 kN; Mass pillow block:94.3 kg; Ca:77.8 mm; A2:260.35 mm; P60°:301 kN; Stabilizing ring:SR-28-0; Pa:28.5 kN;

Fatigue load limit Pu:0.475 kN; B:38.1 mm; Limiting speed:1200 r/min; A1:15 mm; Recommended tightening torque for grub screw:4 N·m; Mass bearing unit:0.44 kg; Hexagonal key size for grub screw N:3 mm; Db:78 mm; Da:76.2 mm; A5:20 mm;

Fillet Radius rb:1.00 mm; d:110.000 mm; Basic Dynamic Radial Load Rating C:265000 N; Basic Static Radial Load Rating Co:310000 N; D:200.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2300 rpm; Oil Speed Rating n2:3000 rpm; B:76.00 mm;

d1 ≈:895 mm; D1 ≈:755 mm; da min.:839 mm; Minimum load factor A:390; d:750 mm; D:900 mm; Da max.:811 mm; H:120 mm; ra max.:3 mm; Limiting speed:480 r/min;

da:56 min; Dynamic (Cr):59.553 kN; Pu:2.655 kN; d:50 mm; B:30.2 mm; d:50  ; D:90 mm; ra:1 max; Static (Cor):58.400 kN; rs (min):1.1 mm;

P180°:127 kN; Initial grease fill:481.95 g; R2:38.1 mm; P90°:180 kN; Mass pillow block:94.3 kg; Ca:77.8 mm; A2:260.35 mm; P60°:301 kN; Stabilizing ring:SR-28-0; Pa:28.5 kN;