Bearing 380TDI620-1

A1:88.9 mm; Labyrinth ring (dc shaft position):LOR 37; P120°:21.8 kN; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:298.3 N·m; H2:31.75 mm; Cap bolt:2 x 5/8-11 UNC; db:77.787 mm; J1:53.975 mm; H:167.481 mm;

Mass bearing:365 kg; D:571.5 mm; Thrust factor K:1.74; B:342.54 mm; Comparative radial load rating CF:1660 kN; T:342.9 mm; Calculation factor e:0.33; Comparative axial load rating CFa:276 kN; Calculation factor Y2:3; Calculation factor Y0:2;

Fatigue load limit Pu:0.475 kN; B:38.1 mm; Limiting speed:1200 r/min; A1:15 mm; Recommended tightening torque for grub screw:4 N·m; Mass bearing unit:0.44 kg; Hexagonal key size for grub screw N:3 mm; Db:78 mm; Da:76.2 mm; A5:20 mm;

Fatigue load limit Pu:0.475 kN; B:38.1 mm; Limiting speed:1200 r/min; A1:15 mm; Recommended tightening torque for grub screw:4 N·m; Mass bearing unit:0.44 kg; Hexagonal key size for grub screw N:3 mm; Db:78 mm; Da:76.2 mm; A5:20 mm;

d1 ≈:895 mm; D1 ≈:755 mm; da min.:839 mm; Minimum load factor A:390; d:750 mm; D:900 mm; Da max.:811 mm; H:120 mm; ra max.:3 mm; Limiting speed:480 r/min;

Mass withdrawal sleeve:406 kg; d:1060 mm; Nut for removal:HM 30/1120; A:15 mm; B1:385 mm; G1:60 mm; Hydraulic nut:HMV 224 E; B2:407 mm; d1:1000 mm; G2:G 1/4;

da:56 min; Dynamic (Cr):59.553 kN; Pu:2.655 kN; d:50 mm; B:30.2 mm; d:50  ; D:90 mm; ra:1 max; Static (Cor):58.400 kN; rs (min):1.1 mm;

B:14.00 mm; d:20.000 mm; D:47.0000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:15000 rpm; Basic Static Radial Load Rating Co:8500 N; Oil Speed Rating n2:18000 rpm; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:14000 N;

Fillet Radius rb:1.00 mm; d:110.000 mm; Basic Dynamic Radial Load Rating C:265000 N; Basic Static Radial Load Rating Co:310000 N; D:200.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2300 rpm; Oil Speed Rating n2:3000 rpm; B:76.00 mm;

Height G:3.438 in; Bolt Pattern E:10 1/2 in; Shaft C/L Distance F:1 27/32 in; Frame Size B:12 in; Travel:6; Bolt Pattern D:2 3/4 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Bolt Pattern C:0.55 in; Frame Size A:4 41/64 in;

P180°:127 kN; Initial grease fill:481.95 g; R2:38.1 mm; P90°:180 kN; Mass pillow block:94.3 kg; Ca:77.8 mm; A2:260.35 mm; P60°:301 kN; Stabilizing ring:SR-28-0; Pa:28.5 kN;

da:56 min; Dynamic (Cr):59.553 kN; Pu:2.655 kN; d:50 mm; B:30.2 mm; d:50  ; D:90 mm; ra:1 max; Static (Cor):58.400 kN; rs (min):1.1 mm;

da:56 min; Dynamic (Cr):59.553 kN; Pu:2.655 kN; d:50 mm; B:30.2 mm; d:50  ; D:90 mm; ra:1 max; Static (Cor):58.400 kN; rs (min):1.1 mm;