Bearing 195TDI305-1 540TDI860-1

A1:88.9 mm; Labyrinth ring (dc shaft position):LOR 37; P120°:21.8 kN; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:298.3 N·m; H2:31.75 mm; Cap bolt:2 x 5/8-11 UNC; db:77.787 mm; J1:53.975 mm; H:167.481 mm;

da:56 min; Dynamic (Cr):59.553 kN; Pu:2.655 kN; d:50 mm; B:30.2 mm; d:50  ; D:90 mm; ra:1 max; Static (Cor):58.400 kN; rs (min):1.1 mm;

da:56 min; Dynamic (Cr):59.553 kN; Pu:2.655 kN; d:50 mm; B:30.2 mm; d:50  ; D:90 mm; ra:1 max; Static (Cor):58.400 kN; rs (min):1.1 mm;

Fillet Radius rb:1.00 mm; d:110.000 mm; Basic Dynamic Radial Load Rating C:265000 N; Basic Static Radial Load Rating Co:310000 N; D:200.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2300 rpm; Oil Speed Rating n2:3000 rpm; B:76.00 mm;

Mass withdrawal sleeve:406 kg; d:1060 mm; Nut for removal:HM 30/1120; A:15 mm; B1:385 mm; G1:60 mm; Hydraulic nut:HMV 224 E; B2:407 mm; d1:1000 mm; G2:G 1/4;

Fillet Radius rb:1.00 mm; d:110.000 mm; Basic Dynamic Radial Load Rating C:265000 N; Basic Static Radial Load Rating Co:310000 N; D:200.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2300 rpm; Oil Speed Rating n2:3000 rpm; B:76.00 mm;

B:14.00 mm; d:20.000 mm; D:47.0000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:15000 rpm; Basic Static Radial Load Rating Co:8500 N; Oil Speed Rating n2:18000 rpm; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:14000 N;

Static (Cor):5.5 mm; with tapered bore:3 800 min-1; Oil:34.020 kN; d:55 mm; B:43 mm; Grease:279 kN; D:120 mm; with cylindrical bore:3 000 min-1; rs (min):2 mm; Pu:230 kN;

da:56 min; Dynamic (Cr):59.553 kN; Pu:2.655 kN; d:50 mm; B:30.2 mm; d:50  ; D:90 mm; ra:1 max; Static (Cor):58.400 kN; rs (min):1.1 mm;

r1s (min):1.1 mm; D:80 mm; d2:40 mm; F:50 mm; B:23 mm; E:mm; d2 (max):mm; b1:mm; Pu:6.850 kN; Dynamic (Ca):57.3 kN;

Fillet Radius rb:1.00 mm; d:110.000 mm; Basic Dynamic Radial Load Rating C:265000 N; Basic Static Radial Load Rating Co:310000 N; D:200.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2300 rpm; Oil Speed Rating n2:3000 rpm; B:76.00 mm;

d1 ≈:895 mm; D1 ≈:755 mm; da min.:839 mm; Minimum load factor A:390; d:750 mm; D:900 mm; Da max.:811 mm; H:120 mm; ra max.:3 mm; Limiting speed:480 r/min;

Mass withdrawal sleeve:406 kg; d:1060 mm; Nut for removal:HM 30/1120; A:15 mm; B1:385 mm; G1:60 mm; Hydraulic nut:HMV 224 E; B2:407 mm; d1:1000 mm; G2:G 1/4;