Bearing 360TTF6201

d1:90 mm; Hydraulic nut:HMV 20 E; Lock nut:KMFE 20; d3:130 mm; G:M 100x2; B1:97 mm; d:100 mm; Mass adapter sleeve assembly:2 kg; B:21 mm;

Housing:SAF 028 KA; RG:1/2 NPT; J max.:368.3 mm; Da:210 mm; Adapter sleeve assembly:SNW 3028x4.15/16; Cap bolt recommended tightening torque:1220 N·m; N1:22.225 mm; da:125.412 mm; L:419.1 mm; Initial grease fill:379.89 g;

Housing:SAF 028 KA; RG:1/2 NPT; J max.:368.3 mm; Da:210 mm; Adapter sleeve assembly:SNW 3028x4.15/16; Cap bolt recommended tightening torque:1220 N·m; N1:22.225 mm; da:125.412 mm; L:419.1 mm; Initial grease fill:379.89 g;

Grease Speed Rating n1:3800 rpm; Sealed Speed Rating n3:3800 rpm; d:60.000 mm; Accessories:No Shield, no Seal,; Oil Speed Rating n2:5000 rpm; Fillet Radius ra:1.50 mm; B:38.10 mm; Basic Static Radial Load Rating Co:58500 N; Basic Dynamic Radial Load Rating C:70200 N; D:110.0000 mm;

H1:57.15 mm; d2:68.659 mm; Mass bearing unit:4.22 kg; J min.:174.625 mm; s:25.4 mm; H:114.3 mm; Attachment bolt diameter G:15.875 mm; S:0.794 mm; da:44.45 mm; H2:33.337 mm;

P180°:84.5 kN; R2:36.513 mm; RG:1/2 NPT; Pa:25.4 kN; A1:133.35 mm; Labyrinth ring:2 x LOR 129; Da:240 mm; Mass pillow block:79.7 kg; Ca:89.789 mm; J max.:406.4 mm;

d1:90 mm; Hydraulic nut:HMV 20 E; Lock nut:KMFE 20; d3:130 mm; G:M 100x2; B1:97 mm; d:100 mm; Mass adapter sleeve assembly:2 kg; B:21 mm;

H1:57.15 mm; d2:68.659 mm; Mass bearing unit:4.22 kg; J min.:174.625 mm; s:25.4 mm; H:114.3 mm; Attachment bolt diameter G:15.875 mm; S:0.794 mm; da:44.45 mm; H2:33.337 mm;

C:63 mm; a:53.307 mm; Da min.:185 mm; Calculation factor e:0.35; Fatigue load limit Pu:85 kN; Db min.:209 mm; da max.:129 mm; Basic static load rating C0:815 kN; rb max.:3 mm; Mass bearing:14.1 kg;

P60°:301 kN; Stabilizing ring:SR-28-0; RG:3/4 NPT; H:298.45 mm; Ca:77.8 mm; Housing:SSAFS 528; End plug (suffix Y):EPR 27; Mass pillow block:94.3 kg; Cap bolt:3/4-10 UNC; Adapter sleeve assembly:SNW 28x5;

d1:90 mm; Hydraulic nut:HMV 20 E; Lock nut:KMFE 20; d3:130 mm; G:M 100x2; B1:97 mm; d:100 mm; Mass adapter sleeve assembly:2 kg; B:21 mm;

P180°:84.5 kN; R2:36.513 mm; RG:1/2 NPT; Pa:25.4 kN; A1:133.35 mm; Labyrinth ring:2 x LOR 129; Da:240 mm; Mass pillow block:79.7 kg; Ca:89.789 mm; J max.:406.4 mm;

Grease Speed Rating Open/Shielded n1:9000 rpm; Accessories:One Seal; B:21.00 mm; Basic Static Radial Load Rating Co:19300 N; d:25.000 mm; Basic Dynamic Radial Load Rating C:35800 N; Sealed Speed Rating n3:6400 rpm; Oil Speed Rating Open/Shielded n2:11000 rpm; D:80.0000 mm; Fillet Radius ra:1.50 mm;

B:43.00 mm; d:90.000 mm; Basic Dynamic Radial Load Rating C:186000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:3400 rpm; D:190.0000 mm; Oil Speed Rating n2:4000 rpm; Basic Static Radial Load Rating Co:160000 N;