888CK Swing Gear Box P2348543

Recommended tightening torque for grub screw:7.4 N·m; Mass bearing unit:1.8 kg; L:175 mm; End cover:ECY 208; H1:49.2 mm; J max.:146 mm; Bearing:YSPAG 208; Basic dynamic load rating C:30.7 kN; J:135.5 mm; A:48 mm;

ba:64.294 mm; H1:152.4 mm; P180°:127 kN; h:44.45 mm; Da:259.999 mm; J1:85.725 mm; da:147.637 mm; L:511.175 mm; P120°:116 kN; J max.:434.975 mm;

da max.:265 mm; C:100 mm; D:340 mm; rb max.:1 mm; Da max.:329 mm; Design (sliding contact surface combination):Steel/PTFE fabric; da min.:253 mm; B:140 mm; r2 min.:1.1 mm; Basic dynamic load rating C:7200 kN;

h1:295 mm; Basic static load rating C0:655 kN; B:55 mm; d4 ≈:105 mm; d:80 mm; l7 min.:88 mm; Specific dynamic load factor K:100 N/mm²; d2 max.:182 mm; Mass rod end:15 kg; Material constant KM:330;

Grease Speed Rating n1:1600 rpm; d:180.000 mm; Fillet Radius ra:2.00 mm; B:92.00 mm; Basic Dynamic Radial Load Rating C:338000 N; Basic Static Radial Load Rating Co:520000 N; D:280.0000 mm; Oil Speed Rating n2:2100 rpm; Fillet Radius rb:1.00 mm;

Oil Speed Rating Open/Shielded n2:1500 rpm; Sealed Speed Rating n3:750 rpm; D:440.0000 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:390000 N; d:320.000 mm; Basic Dynamic Radial Load Rating C:276000 N; Accessories:Two Shields; B:56.00 mm; Grease Speed Rating Open/Shielded n1:1200 rpm;

Grease Speed Rating n1:1600 rpm; d:180.000 mm; Fillet Radius ra:2.00 mm; B:92.00 mm; Basic Dynamic Radial Load Rating C:338000 N; Basic Static Radial Load Rating Co:520000 N; D:280.0000 mm; Oil Speed Rating n2:2100 rpm; Fillet Radius rb:1.00 mm;

Hydraulic nut:HMV 52 E; B1:180 mm; G1:20 mm; G2:G 1/4; Mass withdrawal sleeve:11.5 kg; d1:220 mm; A:9 mm; Nut for removal:HM 3052; B2:195 mm; d:240 mm;

Mass pillow block:93.5 kg; Appropriate attachment bolt size G:1 in; Housing:SAF 624; da:103.188 mm; Ca:95.809 mm; Labyrinth ring:2 x LOR 111; Cap bolt, SAE grade:5; P60°:230 kN; H1:160.325 mm; J1:95.25 mm;

ba:64.294 mm; H1:152.4 mm; P180°:127 kN; h:44.45 mm; Da:259.999 mm; J1:85.725 mm; da:147.637 mm; L:511.175 mm; P120°:116 kN; J max.:434.975 mm;

Hydraulic nut:HMV 52 E; B1:180 mm; G1:20 mm; G2:G 1/4; Mass withdrawal sleeve:11.5 kg; d1:220 mm; A:9 mm; Nut for removal:HM 3052; B2:195 mm; d:240 mm;

Recommended tightening torque for grub screw:7.4 N·m; Mass bearing unit:1.8 kg; L:175 mm; End cover:ECY 208; H1:49.2 mm; J max.:146 mm; Bearing:YSPAG 208; Basic dynamic load rating C:30.7 kN; J:135.5 mm; A:48 mm;

Grease Speed Rating Open/Shielded n1:26000 rpm; D:28.0000 mm; Basic Dynamic Radial Load Rating C:5070 N; Accessories:Two Shields & Snap-R; Oil Speed Rating Open/Shielded n2:32000 rpm; Sealed Speed Rating n3:17000 rpm; d:12.000 mm; B:8.00 mm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:2360 N;

X-L-O Part Number:155-87; Grease Speed Rating Max. n1:6000 rpm; Preload:60 lb; Fillet Radius ra:2.00 mm; Oil Speed Rating Max. n2:7000 rpm; Keyway f:4.7 mm; B:57.15 mm; D:120.7000 mm; Keyway e:70.9 mm; Oil Mist Speed Rating Max. n3:10000 rpm;