CX290NLC Swing Gear Box KSC0235

X-L-O Part Number:155-87; Grease Speed Rating Max. n1:6000 rpm; Preload:60 lb; Fillet Radius ra:2.00 mm; Oil Speed Rating Max. n2:7000 rpm; Keyway f:4.7 mm; B:57.15 mm; D:120.7000 mm; Keyway e:70.9 mm; Oil Mist Speed Rating Max. n3:10000 rpm;

Hydraulic nut:HMV 52 E; B1:180 mm; G1:20 mm; G2:G 1/4; Mass withdrawal sleeve:11.5 kg; d1:220 mm; A:9 mm; Nut for removal:HM 3052; B2:195 mm; d:240 mm;

Grease Speed Rating Open/Shielded n1:26000 rpm; D:28.0000 mm; Basic Dynamic Radial Load Rating C:5070 N; Accessories:Two Shields & Snap-R; Oil Speed Rating Open/Shielded n2:32000 rpm; Sealed Speed Rating n3:17000 rpm; d:12.000 mm; B:8.00 mm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:2360 N;

B:24 mm; d2:106.13 mm; Preload class B GB:320 N; Basic static load rating C0:40 kN; Attainable speed for oil-air lubrication:20000 r/min; Da max.:133 mm; Calculation factor (single, tandem) X2:0.41; Static axial stiffness, preload class B:203 N/µm; D:140 mm; Calculation factor e:0.68;

Grease Speed Rating n1:1600 rpm; d:180.000 mm; Fillet Radius ra:2.00 mm; B:92.00 mm; Basic Dynamic Radial Load Rating C:338000 N; Basic Static Radial Load Rating Co:520000 N; D:280.0000 mm; Oil Speed Rating n2:2100 rpm; Fillet Radius rb:1.00 mm;

h1:295 mm; Basic static load rating C0:655 kN; B:55 mm; d4 ≈:105 mm; d:80 mm; l7 min.:88 mm; Specific dynamic load factor K:100 N/mm²; d2 max.:182 mm; Mass rod end:15 kg; Material constant KM:330;

h1:295 mm; Basic static load rating C0:655 kN; B:55 mm; d4 ≈:105 mm; d:80 mm; l7 min.:88 mm; Specific dynamic load factor K:100 N/mm²; d2 max.:182 mm; Mass rod end:15 kg; Material constant KM:330;

B:40 mm; F:156 mm; d2 (max):167 mm; D:230 mm; Static (Coa):322 kN; d2:130 mm; b:11 mm; Dynamic (Ca):271 kN; r1s (min):3 mm; rs (min):3 mm;

P180°:160 kN; H1:200.025 mm; Max. speed for Taconite seal:385 r/min; Eye bolt:2 x 1/2-13 UNC; ba:80.169 mm; P150°:136 kN; A2:339.725 mm; Taconite seal:TER 165; N1:34.925 mm; Ca:101.803 mm;

Mass pillow block:93.5 kg; Appropriate attachment bolt size G:1 in; Housing:SAF 624; da:103.188 mm; Ca:95.809 mm; Labyrinth ring:2 x LOR 111; Cap bolt, SAE grade:5; P60°:230 kN; H1:160.325 mm; J1:95.25 mm;

B:40 mm; F:156 mm; d2 (max):167 mm; D:230 mm; Static (Coa):322 kN; d2:130 mm; b:11 mm; Dynamic (Ca):271 kN; r1s (min):3 mm; rs (min):3 mm;

B:24 mm; d2:106.13 mm; Preload class B GB:320 N; Basic static load rating C0:40 kN; Attainable speed for oil-air lubrication:20000 r/min; Da max.:133 mm; Calculation factor (single, tandem) X2:0.41; Static axial stiffness, preload class B:203 N/µm; D:140 mm; Calculation factor e:0.68;

X-L-O Part Number:155-87; Grease Speed Rating Max. n1:6000 rpm; Preload:60 lb; Fillet Radius ra:2.00 mm; Oil Speed Rating Max. n2:7000 rpm; Keyway f:4.7 mm; B:57.15 mm; D:120.7000 mm; Keyway e:70.9 mm; Oil Mist Speed Rating Max. n3:10000 rpm;

da max.:80 mm; Mass bearing pair:3.43 kg; r5 min.:0.6 mm; Limiting speed:5300 r/min; Basic dynamic load rating C:361 kN; Da min.:104 mm; Basic static load rating C0:500 kN; Calculation factor Y1:1.8; rc max.:0.6 mm; Fatigue load limit Pu:57 kN;

da max.:265 mm; C:100 mm; D:340 mm; rb max.:1 mm; Da max.:329 mm; Design (sliding contact surface combination):Steel/PTFE fabric; da min.:253 mm; B:140 mm; r2 min.:1.1 mm; Basic dynamic load rating C:7200 kN;