Bearing LM767749DW-710-710D

Da:250 mm; H2:60.325 mm; P60°:301 kN; P120°:116 kN; H:298.45 mm; Taconite seal:TER 121; R2:38.1 mm; Cap bolt, SAE grade:8; Initial grease fill:481.95 g; L:511.175 mm;

Da:250 mm; H2:60.325 mm; P60°:301 kN; P120°:116 kN; H:298.45 mm; Taconite seal:TER 121; R2:38.1 mm; Cap bolt, SAE grade:8; Initial grease fill:481.95 g; L:511.175 mm;

da:42.862 mm; Basic dynamic load rating C:102 kN; H:107.95 mm; S:0.794 mm; Limiting speed:4500 r/min; J max.:161.925 mm; L:200.025 mm; B:59.531 mm; J min.:155.575 mm; s:29.766 mm;

B:20 mm; d:22 mm; r, r1,2 min.:0.3 mm; F:26 mm; Mass inner ring:0.023 kg;

D:200.0000 mm; Basic Dynamic Radial Load Rating C:291000 N; d:95.000 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:325000 N; Fillet Radius ra:2.50 mm; B:90.00 mm; Oil Speed Rating n2:3200 rpm; Grease Speed Rating n1:2500 rpm;

B:20 mm; d:22 mm; r, r1,2 min.:0.3 mm; F:26 mm; Mass inner ring:0.023 kg;

Mass bearing unit:22.5 kg; J min.:304.8 mm; H2:61.913 mm; H1:107.95 mm; J max.:333.375 mm; J1:57.15 mm; Attachment bolt diameter G:19.05 mm; s:41.275 mm; da:101.6 mm; d2:152.4 mm;

d1 ≈:46.7 mm; r1,2 min.:1.5 mm; Calculation factor e:0.46; Calculation factor kr:0.05; Calculation factor Y0:1.4; D1 ≈:67 mm; da min.:44 mm; Calculation factor Y2:2.1; da max.:46 mm; Basic static load rating C0:11.2 kN;

B:20 mm; d:22 mm; r, r1,2 min.:0.3 mm; F:26 mm; Mass inner ring:0.023 kg;

Cap bolt recommended tightening torque:203.4 N·m; R2:33.337 mm; Cap bolt:4 x 3/4-10 UNC; PG:1/4 NPT; P90°:136 kN; ba:72.231 mm; J1:95.25 mm; Cap bolt, SAE grade:5; P60°:226 kN; Bearing:22326 CC/W33;

d:40.000 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:47500 N; Basic Static Radial Load Rating Co:30500 N; B:23.00 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:9000 rpm; Grease Speed Rating n1:6700 rpm;

d:40.000 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:47500 N; Basic Static Radial Load Rating Co:30500 N; B:23.00 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:9000 rpm; Grease Speed Rating n1:6700 rpm;

d:40.000 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:47500 N; Basic Static Radial Load Rating Co:30500 N; B:23.00 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:9000 rpm; Grease Speed Rating n1:6700 rpm;

Dynamic (Ca):117 kN; Pu:13.900 kN; d2 (max):71.4 mm; b1:13 mm; F:65 mm; b:8 mm; Static (Coa):114 kN; d2:50 mm; D:110 mm; rs (min):2 mm;

Dynamic (Ca):117 kN; Pu:13.900 kN; d2 (max):71.4 mm; b1:13 mm; F:65 mm; b:8 mm; Static (Coa):114 kN; d2:50 mm; D:110 mm; rs (min):2 mm;