888BCK Swing Gear Box X2648586

h1:295 mm; Basic static load rating C0:655 kN; B:55 mm; d4 ≈:105 mm; d:80 mm; l7 min.:88 mm; Specific dynamic load factor K:100 N/mm²; d2 max.:182 mm; Mass rod end:15 kg; Material constant KM:330;

Oil Speed Rating Open/Shielded n2:1500 rpm; Sealed Speed Rating n3:750 rpm; D:440.0000 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:390000 N; d:320.000 mm; Basic Dynamic Radial Load Rating C:276000 N; Accessories:Two Shields; B:56.00 mm; Grease Speed Rating Open/Shielded n1:1200 rpm;

B:40 mm; F:156 mm; d2 (max):167 mm; D:230 mm; Static (Coa):322 kN; d2:130 mm; b:11 mm; Dynamic (Ca):271 kN; r1s (min):3 mm; rs (min):3 mm;

Labyrinth ring:2 x LOR 154; Pa:52.5 kN; R2:42.069 mm; J min.:549.275 mm; P90°:249 kN; ba:78.581 mm; N1:34.925 mm; A2:276.225 mm; J1:114.3 mm; Stabilizing ring:SR-38-32;

h1:295 mm; Basic static load rating C0:655 kN; B:55 mm; d4 ≈:105 mm; d:80 mm; l7 min.:88 mm; Specific dynamic load factor K:100 N/mm²; d2 max.:182 mm; Mass rod end:15 kg; Material constant KM:330;

Recommended tightening torque for grub screw:7.4 N·m; Mass bearing unit:1.8 kg; L:175 mm; End cover:ECY 208; H1:49.2 mm; J max.:146 mm; Bearing:YSPAG 208; Basic dynamic load rating C:30.7 kN; J:135.5 mm; A:48 mm;

Oil Speed Rating Open/Shielded n2:1500 rpm; Sealed Speed Rating n3:750 rpm; D:440.0000 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:390000 N; d:320.000 mm; Basic Dynamic Radial Load Rating C:276000 N; Accessories:Two Shields; B:56.00 mm; Grease Speed Rating Open/Shielded n1:1200 rpm;

Recommended tightening torque for grub screw:7.4 N·m; Mass bearing unit:1.8 kg; L:175 mm; End cover:ECY 208; H1:49.2 mm; J max.:146 mm; Bearing:YSPAG 208; Basic dynamic load rating C:30.7 kN; J:135.5 mm; A:48 mm;

ba:64.294 mm; H1:152.4 mm; P180°:127 kN; h:44.45 mm; Da:259.999 mm; J1:85.725 mm; da:147.637 mm; L:511.175 mm; P120°:116 kN; J max.:434.975 mm;

B:24 mm; d2:106.13 mm; Preload class B GB:320 N; Basic static load rating C0:40 kN; Attainable speed for oil-air lubrication:20000 r/min; Da max.:133 mm; Calculation factor (single, tandem) X2:0.41; Static axial stiffness, preload class B:203 N/µm; D:140 mm; Calculation factor e:0.68;

B:24 mm; d2:106.13 mm; Preload class B GB:320 N; Basic static load rating C0:40 kN; Attainable speed for oil-air lubrication:20000 r/min; Da max.:133 mm; Calculation factor (single, tandem) X2:0.41; Static axial stiffness, preload class B:203 N/µm; D:140 mm; Calculation factor e:0.68;

X-L-O Part Number:155-87; Grease Speed Rating Max. n1:6000 rpm; Preload:60 lb; Fillet Radius ra:2.00 mm; Oil Speed Rating Max. n2:7000 rpm; Keyway f:4.7 mm; B:57.15 mm; D:120.7000 mm; Keyway e:70.9 mm; Oil Mist Speed Rating Max. n3:10000 rpm;

Hydraulic nut:HMV 52 E; B1:180 mm; G1:20 mm; G2:G 1/4; Mass withdrawal sleeve:11.5 kg; d1:220 mm; A:9 mm; Nut for removal:HM 3052; B2:195 mm; d:240 mm;

X-L-O Part Number:155-87; Grease Speed Rating Max. n1:6000 rpm; Preload:60 lb; Fillet Radius ra:2.00 mm; Oil Speed Rating Max. n2:7000 rpm; Keyway f:4.7 mm; B:57.15 mm; D:120.7000 mm; Keyway e:70.9 mm; Oil Mist Speed Rating Max. n3:10000 rpm;

ba:64.294 mm; H1:152.4 mm; P180°:127 kN; h:44.45 mm; Da:259.999 mm; J1:85.725 mm; da:147.637 mm; L:511.175 mm; P120°:116 kN; J max.:434.975 mm;