9046 Swing Gear Box 158856A1

Grease Speed Rating n1:1600 rpm; d:180.000 mm; Fillet Radius ra:2.00 mm; B:92.00 mm; Basic Dynamic Radial Load Rating C:338000 N; Basic Static Radial Load Rating Co:520000 N; D:280.0000 mm; Oil Speed Rating n2:2100 rpm; Fillet Radius rb:1.00 mm;

da max.:265 mm; C:100 mm; D:340 mm; rb max.:1 mm; Da max.:329 mm; Design (sliding contact surface combination):Steel/PTFE fabric; da min.:253 mm; B:140 mm; r2 min.:1.1 mm; Basic dynamic load rating C:7200 kN;

Labyrinth ring:2 x LOR 154; Pa:52.5 kN; R2:42.069 mm; J min.:549.275 mm; P90°:249 kN; ba:78.581 mm; N1:34.925 mm; A2:276.225 mm; J1:114.3 mm; Stabilizing ring:SR-38-32;

Hydraulic nut:HMV 52 E; B1:180 mm; G1:20 mm; G2:G 1/4; Mass withdrawal sleeve:11.5 kg; d1:220 mm; A:9 mm; Nut for removal:HM 3052; B2:195 mm; d:240 mm;

da max.:265 mm; C:100 mm; D:340 mm; rb max.:1 mm; Da max.:329 mm; Design (sliding contact surface combination):Steel/PTFE fabric; da min.:253 mm; B:140 mm; r2 min.:1.1 mm; Basic dynamic load rating C:7200 kN;

P180°:160 kN; H1:200.025 mm; Max. speed for Taconite seal:385 r/min; Eye bolt:2 x 1/2-13 UNC; ba:80.169 mm; P150°:136 kN; A2:339.725 mm; Taconite seal:TER 165; N1:34.925 mm; Ca:101.803 mm;

P180°:160 kN; H1:200.025 mm; Max. speed for Taconite seal:385 r/min; Eye bolt:2 x 1/2-13 UNC; ba:80.169 mm; P150°:136 kN; A2:339.725 mm; Taconite seal:TER 165; N1:34.925 mm; Ca:101.803 mm;

P180°:160 kN; H1:200.025 mm; Max. speed for Taconite seal:385 r/min; Eye bolt:2 x 1/2-13 UNC; ba:80.169 mm; P150°:136 kN; A2:339.725 mm; Taconite seal:TER 165; N1:34.925 mm; Ca:101.803 mm;

Hydraulic nut:HMV 52 E; B1:180 mm; G1:20 mm; G2:G 1/4; Mass withdrawal sleeve:11.5 kg; d1:220 mm; A:9 mm; Nut for removal:HM 3052; B2:195 mm; d:240 mm;

X-L-O Part Number:155-87; Grease Speed Rating Max. n1:6000 rpm; Preload:60 lb; Fillet Radius ra:2.00 mm; Oil Speed Rating Max. n2:7000 rpm; Keyway f:4.7 mm; B:57.15 mm; D:120.7000 mm; Keyway e:70.9 mm; Oil Mist Speed Rating Max. n3:10000 rpm;

B:24 mm; d2:106.13 mm; Preload class B GB:320 N; Basic static load rating C0:40 kN; Attainable speed for oil-air lubrication:20000 r/min; Da max.:133 mm; Calculation factor (single, tandem) X2:0.41; Static axial stiffness, preload class B:203 N/µm; D:140 mm; Calculation factor e:0.68;

ba:64.294 mm; H1:152.4 mm; P180°:127 kN; h:44.45 mm; Da:259.999 mm; J1:85.725 mm; da:147.637 mm; L:511.175 mm; P120°:116 kN; J max.:434.975 mm;

B:40 mm; F:156 mm; d2 (max):167 mm; D:230 mm; Static (Coa):322 kN; d2:130 mm; b:11 mm; Dynamic (Ca):271 kN; r1s (min):3 mm; rs (min):3 mm;

X-L-O Part Number:155-87; Grease Speed Rating Max. n1:6000 rpm; Preload:60 lb; Fillet Radius ra:2.00 mm; Oil Speed Rating Max. n2:7000 rpm; Keyway f:4.7 mm; B:57.15 mm; D:120.7000 mm; Keyway e:70.9 mm; Oil Mist Speed Rating Max. n3:10000 rpm;

Grease Speed Rating Open/Shielded n1:26000 rpm; D:28.0000 mm; Basic Dynamic Radial Load Rating C:5070 N; Accessories:Two Shields & Snap-R; Oil Speed Rating Open/Shielded n2:32000 rpm; Sealed Speed Rating n3:17000 rpm; d:12.000 mm; B:8.00 mm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:2360 N;