Slew Drive CX210B Tier 3 KRC10220 Assembly

Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6300 rpm; Oil Speed Rating n2:11000 rpm; B:19.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating Co:16000 N; d:30.000 mm; Basic Dynamic Radial Load Rating C:28100 N; Grease Speed Rating n1:9000 rpm; D:72.0000 mm;

Travel:6; Frame Size B:12 in; Bolt Pattern E:10 1/2 in; Shaft C/L Distance F:1 27/32 in; Height G:3.438 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Frame Size A:4 41/64 in; Bolt Pattern C:0.55 in; Bolt Pattern D:2 3/4 in;

r, r1,2 min.:1.1 mm; B:40 mm; d:150 mm; F:165 mm; Mass inner ring:1.12 kg;

da min.:39.8 mm; Basic dynamic load rating C:56 kN; Basic static load rating C0:48 kN; Fatigue load limit Pu:6.1 kN; r1,2 min.:1.1 mm; Reference speed:11000 r/min; B:17 mm; r3,4 min.:0.6 mm; d:35 mm; ra max.:1 mm;

Initial grease fill:481.95 g; RG:3/4 NPT; H2:60.325 mm; Appropriate attachment bolt size G:1 in; A1:149.225 mm; P90°:149 kN; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Stabilizing ring:2 x SR-0-24; Ca:86.614 mm;

r1,2 min.:2.1 mm; Fatigue load limit Pu:163 kN; G:M 170x3; Calculation factor Y1:1.7; Calculation factor Y2:2.5; da min.:168 mm; D1 ≈:228 mm; Basic static load rating C0:1760 kN; B1:124 mm; K:4.5 mm;

G:M 130x2; Lock nut:KMFE 26; d1:115 mm; Mass adapter sleeve assembly:2.9 kg; Hydraulic nut:HMV 26 E; d3:165 mm; d:130 mm; B1:80 mm; B:28 mm;

Fillet Radius ra:1.00 mm; Accessories:Two Seals & Snap-Rin; D:47.0000 mm; Basic Static Radial Load Rating Co:12000 N; Oil Speed Rating n2:13000 rpm; Basic Dynamic Radial Load Rating C:19000 N; Grease Speed Rating n1:9000 rpm; Sealed Speed Rating n3:9000 rpm; d:20.000 mm; B:20.60 mm;

Basic static load rating C0:14.6 kN; ra max.:0.3 mm; da:23.6 mm; Basic dynamic load rating C:9.52 kN; E:24 mm; Fatigue load limit Pu:1.66 kN; C:13 mm; Db:20.4 mm; Reference speed:20000 r/min; r1,2 min.:0.3 mm;

G:M 130x2; Lock nut:KMFE 26; d1:115 mm; Mass adapter sleeve assembly:2.9 kg; Hydraulic nut:HMV 26 E; d3:165 mm; d:130 mm; B1:80 mm; B:28 mm;

d1 ≈:189.9 mm; D:280 mm; Calculation factor Y0:0.26; Calculation factor kr:0.09; Calculation factor X:0.57; da min.:147 mm; Calculation factor Y2:0.57; Reference speed:2800 r/min; Db max.:271 mm; Calculation factor X:0.35;

Ca:89.789 mm; A1:133.35 mm; Appropriate attachment bolt size G:0.875 in; P150°:68.1 kN; Lock nut:AN 26; N1:25.4 mm; H1:152.4 mm; Taconite seal (db shaft position):TER 136; Pa:31.2 kN; RG:1/2 NPT;

Fillet Radius ra:1.00 mm; Accessories:Two Seals & Snap-Rin; D:47.0000 mm; Basic Static Radial Load Rating Co:12000 N; Oil Speed Rating n2:13000 rpm; Basic Dynamic Radial Load Rating C:19000 N; Grease Speed Rating n1:9000 rpm; Sealed Speed Rating n3:9000 rpm; d:20.000 mm; B:20.60 mm;

Initial grease fill:481.95 g; RG:3/4 NPT; H2:60.325 mm; Appropriate attachment bolt size G:1 in; A1:149.225 mm; P90°:149 kN; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Stabilizing ring:2 x SR-0-24; Ca:86.614 mm;

B:23.00 mm; d:40.000 mm; Basic Static Radial Load Rating Co:36000 N; D:90.0000 mm; Accessories:One Shield & Snap-Ri; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; Basic Dynamic Radial Load Rating C:46800 N;