Slew Drive CX210 KRC0226 Assembly

B:23.00 mm; d:40.000 mm; Basic Static Radial Load Rating Co:36000 N; D:90.0000 mm; Accessories:One Shield & Snap-Ri; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; Basic Dynamic Radial Load Rating C:46800 N;

Ca:89.789 mm; A1:133.35 mm; Appropriate attachment bolt size G:0.875 in; P150°:68.1 kN; Lock nut:AN 26; N1:25.4 mm; H1:152.4 mm; Taconite seal (db shaft position):TER 136; Pa:31.2 kN; RG:1/2 NPT;

Initial grease fill:481.95 g; RG:3/4 NPT; H2:60.325 mm; Appropriate attachment bolt size G:1 in; A1:149.225 mm; P90°:149 kN; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Stabilizing ring:2 x SR-0-24; Ca:86.614 mm;

Travel:6; Frame Size B:12 in; Bolt Pattern E:10 1/2 in; Shaft C/L Distance F:1 27/32 in; Height G:3.438 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Frame Size A:4 41/64 in; Bolt Pattern C:0.55 in; Bolt Pattern D:2 3/4 in;

G:M 130x2; Lock nut:KMFE 26; d1:115 mm; Mass adapter sleeve assembly:2.9 kg; Hydraulic nut:HMV 26 E; d3:165 mm; d:130 mm; B1:80 mm; B:28 mm;

Sleeve:S 3172x13.7/16; Mass adapter sleeve assembly:54.5 kg; d3 max.:419.227 mm; B5:55.016 mm; Lock nut:N 072; Hydraulic nut:HMVC 72E; G:359.918 mm; d:360 mm; Threads per inch:5; B1:250.241 mm;

da min.:39.8 mm; Basic dynamic load rating C:56 kN; Basic static load rating C0:48 kN; Fatigue load limit Pu:6.1 kN; r1,2 min.:1.1 mm; Reference speed:11000 r/min; B:17 mm; r3,4 min.:0.6 mm; d:35 mm; ra max.:1 mm;

Ca:89.789 mm; A1:133.35 mm; Appropriate attachment bolt size G:0.875 in; P150°:68.1 kN; Lock nut:AN 26; N1:25.4 mm; H1:152.4 mm; Taconite seal (db shaft position):TER 136; Pa:31.2 kN; RG:1/2 NPT;

Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6300 rpm; Oil Speed Rating n2:11000 rpm; B:19.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating Co:16000 N; d:30.000 mm; Basic Dynamic Radial Load Rating C:28100 N; Grease Speed Rating n1:9000 rpm; D:72.0000 mm;

Initial grease fill:481.95 g; RG:3/4 NPT; H2:60.325 mm; Appropriate attachment bolt size G:1 in; A1:149.225 mm; P90°:149 kN; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Stabilizing ring:2 x SR-0-24; Ca:86.614 mm;

r, r1,2 min.:1.1 mm; B:40 mm; d:150 mm; F:165 mm; Mass inner ring:1.12 kg;

Ca:89.789 mm; A1:133.35 mm; Appropriate attachment bolt size G:0.875 in; P150°:68.1 kN; Lock nut:AN 26; N1:25.4 mm; H1:152.4 mm; Taconite seal (db shaft position):TER 136; Pa:31.2 kN; RG:1/2 NPT;

Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6300 rpm; Oil Speed Rating n2:11000 rpm; B:19.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating Co:16000 N; d:30.000 mm; Basic Dynamic Radial Load Rating C:28100 N; Grease Speed Rating n1:9000 rpm; D:72.0000 mm;

Sealed Speed Rating n3:4300 rpm; Basic Dynamic Radial Load Rating C:57200 N; Basic Static Radial Load Rating Co:47500 N; Accessories:One Shield & Snap-Ri; B:33.30 mm; D:100.0000 mm; Oil Speed Rating n2:5600 rpm; Grease Speed Rating n1:4300 rpm; d:55.000 mm; Fillet Radius ra:1.50 mm;

Initial grease fill:481.95 g; RG:3/4 NPT; H2:60.325 mm; Appropriate attachment bolt size G:1 in; A1:149.225 mm; P90°:149 kN; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Stabilizing ring:2 x SR-0-24; Ca:86.614 mm;