Bearing NN4924K NTN

Basic Dynamic Radial Load Rating C:7610 N; d:10.000 mm; Basic Static Radial Load Rating Co:4300 N; Fillet Radius ra:0.64 mm; Grease Speed Rating n1:16000 rpm; D:30.0000 mm; Oil Speed Rating n2:22000 rpm; D2R:28.2 mm; Sealed Speed Rating n3:16000 rpm; Accessories:Two Shields;

A2:315.119 mm; Bearing:22340 CC/W33; dc:193.675 mm; Lock washer:W 40; A1:228.6 mm; Pa:120 kN; J1:139.7 mm; Appropriate attachment bolt size G:1.5 in; h:87.313 mm; Cap bolt, SAE grade:5;

Basic Static Radial Load Rating Co:16600 N; Fillet Radius rb:0.60 mm; D:47.0000 mm; d:20.000 mm; Oil Speed Rating n2:14000 rpm; B:28.00 mm; Basic Dynamic Radial Load Rating C:24200 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:9500 rpm;

A2:315.119 mm; Bearing:22340 CC/W33; dc:193.675 mm; Lock washer:W 40; A1:228.6 mm; Pa:120 kN; J1:139.7 mm; Appropriate attachment bolt size G:1.5 in; h:87.313 mm; Cap bolt, SAE grade:5;

b:5 mm; B:10.5 mm; Mass lock nut:0.048 kg; G:M 25x1.5; d3:38 mm; d1:30 mm; Grub (set) screw size:M5; Axial static load carrying capacity:31.5 kN; Recommended grub screw tightening torque:4.5 N·m; h:2 mm;

Fw:60 mm; Ew:65 mm; Mass needle roller and cage assembly:0.077 kg; Basic dynamic load rating C:41.3 kN; Basic static load rating C0:116 kN; Reference speed:7000 r/min; Fatigue load limit Pu:14.3 kN; U:30 mm; Limiting speed:8000 r/min;

B:26.00 mm; Type:200-RDM Series (from; Basic Radial Load Rating-Dynamic DC:85200 N; Fillet Radius ra:2.00 mm; Speed Rating-Open and Shielded-Oil OSO:14800 rpm; Speed Rating-Open and Shielded-Grease OSG:10300 rpm; Fillet Radius rb:1.00 mm; D:140.0000 mm; d:80.000 mm; Basic Radial Load Rating-Static SCO:73500 N;

Basic Static Radial Load Rating Co:16600 N; Fillet Radius rb:0.60 mm; D:47.0000 mm; d:20.000 mm; Oil Speed Rating n2:14000 rpm; B:28.00 mm; Basic Dynamic Radial Load Rating C:24200 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:9500 rpm;

d:75 mm; ra:2 max; Da:148 max; Weight:3.06 kg; B:37 mm; Dynamic (Cr):114.000 kN; Static (Cor):76.400 kN; da:86 min; Bearing designation:6315  ; Oil:5 000 min-1;

Initial grease fill:2154.6 g; Cap bolt:4 x 7/8-9 UNC; R1:122.237 mm; P180°:145 kN; Appropriate attachment bolt size G:1.25 in; RG:1 NPT; Bearing:22334 CCK/W33; Max. speed for Taconite seal:520 r/min; Mass pillow block:213 kg; H:422.275 mm;

h1:165 mm; d4 ≈:65 mm; B:32 mm; Material constant KM:330; w:55 mm; l5 ≈:30 mm; dk:60 mm; r1 min.:0.6 mm; l4 max.:219 mm; l3 min.:65 mm;

Initial grease fill:2154.6 g; Cap bolt:4 x 7/8-9 UNC; R1:122.237 mm; P180°:145 kN; Appropriate attachment bolt size G:1.25 in; RG:1 NPT; Bearing:22334 CCK/W33; Max. speed for Taconite seal:520 r/min; Mass pillow block:213 kg; H:422.275 mm;

d:35.000 mm; Accessories:One Seal; Grease Speed Rating n1:5600 rpm; Basic Static Radial Load Rating Co:48000 N; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:5600 rpm; Oil Speed Rating n2:7500 rpm; D:80.0000 mm; B:34.90 mm; Basic Dynamic Radial Load Rating C:52300 N;

da:40 mm; Pa:15 kN; Basic dynamic load rating C:96.5 kN; Attachment bolt diameter G:12 mm; J6:185 mm; End cover:ECY 208; Tightening torque for grub screws:8 N·m; A:60 mm; Fatigue load limit Pu:9.8 kN; N4 max.:6 mm;

da:40 mm; Pa:15 kN; Basic dynamic load rating C:96.5 kN; Attachment bolt diameter G:12 mm; J6:185 mm; End cover:ECY 208; Tightening torque for grub screws:8 N·m; A:60 mm; Fatigue load limit Pu:9.8 kN; N4 max.:6 mm;